.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Fuelling and Intake ( https://www.xt660.com/forumdisplay.php?f=207)
-   -   Snorkel Removal ( https://www.xt660.com/showthread.php?t=321)

gabryzen 20-02-08 13:43

Quote:

Originally Posted by Denny (Post 46854)
You don't bypass the filter. When facing the airbox, you will be drilling the 'airbox' to the left of the filter which is where air from the snorkel is routed anyway.

But yeah buy a stage 2, I hopefully will be soon.

Yes but this mod is hidden, instead the dna stage 2 is too much visible, and think is illegal in Italy... ufffff what a stupid law

Fast Fattie 20-02-08 17:44

Quote:

Originally Posted by Kev (Post 46894)
You can fit both filters, the O2 sensor will correct the fuel mixture under cruising conditions & when the motor is warm. The only problem is the O2 sensor does not work under all conditions & a fueling device is recommended to correct this.

Cheers Kev, top advice as usual. I will get back to you as soon as its run in, and I have decided how far I want to go with the mods.
Cheers.

dave-v-v 07-07-08 19:00

Help I will be doing this today need help
 
Quote:

Originally Posted by Kev (Post 1443)
Remove snorkel. Drill 5x 28mm holes extra holes, plug up side holes using vent caps.

The air filter area is = 9768mm sq the snorkel hole area removed = 4000mmsq by adding 5x extra breathing holes you are able to use the full effect of the STD filter size, without the out lay of a DNA stage 2 filter.

Remember to clean out the airbox well.

You will need to adjust the fuel injection richer, using a power commander or the Kev Fueling Mod.


Works well for me.

Hi can you please help I have made the fueling mod looking to do the 4 holes but reading this I need to do 5, one more extra hole can you please pont out the extra hole? oh and what is this about ? (plug up side holes using vent caps) is this the 4 holes that I have not done yet?

Kev 07-07-08 23:24

The 5th hole if you want to add it is next to the removed snorkel on the left side of the bike on top of the airbox.

These days I recomend drilling 4 holes on the sides. When you want to sell your bike you can buy rubber plugs from you local hardware to block up the holes.

Gwill007 14-08-08 11:57

CO setting on an 07 xtx
 
Kev just tried to change the co setting on my 07 xtx and the setting displayed is 110. This is the original setting as I have never changed it from new. what do you recommend as a setting with the snorkle removed and a stage 1 filter.

Thanks:002:

Mattithyahu 24-08-08 14:29

Hello!
I ride in rain a lot. Is there possibility that removing snorkel AND drilling airbox could cause me problems with water??
Thanx

CaptMoto 24-08-08 20:21

one word 2 letters begins with n and ends with o
:SpinHappy_15XK8L:

simo1432 24-08-08 20:38

advise
 
fitted k&n air filter,fitted ccc cans, put my co up from -4 to 14 if i remove the snorkel will i need to do anything else or will it run even smoother is it advisable to fit some gauze over the hole to prevent objects falling in! or shall i wait till i can get i power commander and just do a stage2 please advise thanks people :eusa_dance:

Bear 24-08-08 21:08

The hole that the snorcle leaves is on the dirty side of the air filter so dont worrie about it!

GStry 10-01-09 16:39

Hi Kev

Need some help please. I have a 1995 Tenere and would like to do the K&N stage 1 and DNA stage 2 but see the stage two cover is different on the Tenere to the 660X/R. Is there a way around this? I have sent an email to DNA asking if they have a stage 2 for the 1995 Tenere but have had no response.
Many thanks


All times are GMT +1. The time now is 21:34.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.