.: XT660.com - The #1 XT660 Resource :.
Page 16 of 16 « First 6 14 15 16
Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Fuelling and Intake ( https://www.xt660.com/forumdisplay.php?f=207)
-   -   Snorkel Removal ( https://www.xt660.com/showthread.php?t=321)

Pleiades 09-03-16 00:27
Quote:
Originally Posted by tougefc (Post 219256)
Does the air filter get much dirtier with the snorkel removed?
No. The snorkel has no effect on filtration. The only reason the snorkel exists is to reduce intake roar (at the expense of air flow). Effectively it is just an intake silencer.

waynovetten 09-03-16 15:15
Quote:
Originally Posted by Steve'O (Post 219246)
Kev is there any advantage to air intake to drill the holes even when i have stage 1&2 dna filters and would it do any harm if i did?
I did with mine and I beleave it does make a difference,the trick is to drill e'm the right size not any old how,so as and when you can reverse the procedure with rubber grommets if you want to.

cam147 09-04-16 21:40
Quote:
Originally Posted by Kev (Post 1544)
The best air intake system is 1st K&N + 2nd DNA stage air filter.

This mod is used only if you don't use the DNA 2nd stage filter.

Remember you will need to adjust the fuel injection richer, using a power commander or the Kev Fueling Mod, to get the best result.
should the snorkel be left in or removed with this set up.

eduardcx 09-05-17 10:43
Quote:
Originally Posted by cam147 (Post 220417)
should the snorkel be left in or removed with this set up.
Would like to know this aswell.

Plan is to have: Both Stage 1 & 2 DNA Filters

So no holes right? Snorkel removed I would GUESS, but is it correct?

Thanks!

-ed

CaptMoto 09-05-17 11:09
Snorkle should be removed with any after market DNA or K&N Filters.

nikroc 09-05-17 11:56
[QUOTE=eduardcx;229700]Would like to know this aswell.

Plan is to have: Both Stage 1 & 2 DNA Filters

So no holes right? Snorkel removed I would GUESS, but is it correct?

Thanks!

-ed[/QUOTE

If you go to stage 1+2 then no need to drill holes in airbox and snorkel is removed..

Astralpsycho 28-07-18 11:06
Quote:
Originally Posted by Denny (Post 27242)
Finally gotten round to having a look into snorkel removel. I've taken the panel off the side of the bike where the air box is and there's some oily residue there, I'm assuming that's from the filter itself, is it something to worry about?

I'm going to hoover the dust/dirt off the filter itself, and I'm also thinking of applying some of that protective oil I've got from my open air K&N car filter?

Any thoughts chaps/lasses???
Oil can get into the airfilterbox if you are doing wheelies :P


All times are GMT +1. The time now is 13:45.
Page 16 of 16 « First 6 14 15 16
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.