Hello Kev,

Here the pics!
http://i59.tinypic.com/14mvrbt.jpg

http://i58.tinypic.com/16m0jl4.jpg

http://i62.tinypic.com/34ni3j4.jpg

http://i61.tinypic.com/2dr5jc1.jpg

Looks good mate well done.

Thanks!
I'm curious about the test results when the bike runs!
Will keep you guys posted!:glasses2:

Ben niet op de testbank geweest, want heb de motor kort erna verkocht :( best wel spijt ervan, want diegene had hem vrij snel kapot gereden.
Ik krijg volgende week weer een xt660 uit 2007 met veel minder km's op het blok.

Merkte wel dat de motor veel speelser was na de kit!
Makkelijke wheelies en eerder koppel.
Die custom airbox van je ziet er super uit!
Zou zelf ook wel zoiets willen op mijn nieuwe xt!

Groetjes

Ah lachen! goed op tijd met het weer haha.
Al idee�n wat je eraan wilt veranderen?

why do not you put the filter k & n straight on the collector? it seems that just remove some plastic at the top.
it is important that both direct as the dna.

Hi dani,

Here can you see how dna did it.
I tried to do the same, but its hard the fit the filter.
So the intake is a little bit longer.

Thom
http://i57.tinypic.com/2urscvt.jpg
http://i62.tinypic.com/120jtj8.jpg

have the measurements of the main filter DNA stage3?
if not straight will not be in the least comparable to the dna stage3.is the fluid dynamics.
see my pictures,you have to cut more the top, by the arrows should understand.
http://i.imgur.com/bgUgCNL.jpg


http://i.imgur.com/ykJmo0i.jpg

http://i.imgur.com/AOL42Bj.jpg

Original dna stage3 filter size is 380mm diameter on bottom and 300mm on top with a length of 110mm.

I know what you mean but i wanted that the filter fitted the box.
With a straight intake the filter sticks out on the top.



Today i received my new plastic's from www.motosp.gr "yamaha black"

sorry 380mm diameter is very big.. 38cm? or 38/6,28= 6,05x2= 12,1cm diameter on bottom?
30/6,28= 4,777x2= 9,55cm on the top?
lenght 11cm
know other measures?
http://i.imgur.com/UzgMrBM.jpg