.: XT660.com - The #1 XT660 Resource :.
Page 1 of 4 1 2 3 Last »
Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   Touratech parts for XT660Z Tenere ( https://www.xt660.com/showthread.php?t=8055)

JMo 10-10-08 08:47
Touratech parts for XT660Z Tenere
 
Someone has just posted this picture over on ADV Rider forum - seems Touratch have got their sh!t together for Intermot... hopefully these parts will be available asap.

http://i492.photobucket.com/albums/r...uratechten.jpg

I like the rear rack plate, and the tool box/bash plate looks nicely done too?

xxx

Gas_Up_Lets_Go 10-10-08 08:59
About time, they were supposed to have kit available mid year,

I'll have to check that GPS mount! I hope they've not been lifting my design..:love-smiley-085:

So, anyone want to buy some Yamaha Panniers ?

dallas 10-10-08 18:17
I visited the Intermot today and I was pleasantly surprised about the quantity of parts developed by Touratech for our Tenere: ten pages of goodies! I took some pics, so y'all can see for yourself. Some are already available, some only as of january 2009. They look solid and well-made, prices differ from normal to expensive(we know that!). Another brand, SW-Motech, also had a prepared Tenere on their stand, as did Hepco&Becker. It's going well! Greetz, Hans.

jpk chios 10-10-08 19:42
Quote:
Originally Posted by dallas (Post 70384)
I visited the Intermot today and I was pleasantly surprised about the quantity of parts developed by Touratech for our Tenere: ten pages of goodies! I took some pics, so y'all can see for yourself. Some are already available, some only as of january 2009. They look solid and well-made, prices differ from normal to expensive(we know that!). Another brand, SW-Motech, also had a prepared Tenere on their stand, as did Hepco&Becker. It's going well! Greetz, Hans.
Great job!You 're a fine reporter...Do you have any photos from the Hepco?:rockwoot:

tricky 10-10-08 19:53
that sump guard look the mutts nuts

dallas 10-10-08 20:11
For the H&B look in the H&B thread, there are pics of my bike equiped with the Lock-it rack and the alu panniers. Hans.

JMo 11-10-08 10:34
Some price info from Hans (from the SW Motech thread):

Quote:
The toolbox can be fitted to the large bashplate(they got a small and a large bashplate) and yes it's lockable. Prices: large bashplate 199,-, toolbox 52,- euro's. Hans.

Some more examples of most wanted parts:
handguards 79,-; spoilers 20,-; spoiler for windshield 74,-; wide ribbed footpegs 83,- + adapters needed 49,-; gps holding bar(mounted to bar above the cockpit, to fit holder for gps) 34,-; tankbag 14/20lt 115,-; pannierrack 214,-; luggagerack 49,-(s) 52,-(l).
Greetz, Hans.

HansP 11-10-08 15:48
Darn! There goes this year's Christmas bonus... ;-)

Gas_Up_Lets_Go 11-10-08 16:35
I'm just looking over this stuff, again, and I'm wondering why Yamaha didn't do some of the things that Touratech have covered, the wide side stand, better footpegs, wider brake levers etc. It would only have added a few extra ��'s to the price, even at �100 it would still have been a good buy and well below all the other bikes in the class.

I do wonder sometimes, especially as they put some extra protection around the rear brake master cylinder and the crankcase (by the brake).

Oh well, I think my bike may grow some extra bits over the winter........

stuxtttr 11-10-08 20:11
Glad they have done the bashplate with the tool box now we just need someone to bring out all the mods and make them more affordable.


All times are GMT +1. The time now is 03:17.
Page 1 of 4 1 2 3 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.