.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   Luggage Top Plate in alu for XT660Z ( https://www.xt660.com/showthread.php?t=19616)

J-P-W 03-09-12 09:59

Quote:

Originally Posted by Metzy (Post 178356)
How about a mount for the bar above the speedo to mount a GPS. Maybe a aluminum block that you can screw a threaded ram mount ball into. The bar is 12mm in diameter and the smallest the ram mounts go down to is for 13mm round bar. Screw in threaded ram mount ball link

Hi Metzy, when I went to fit my TomTom rider I found the supplied mount fitted above the clocks, but very was very tight:

http://farm9.staticflickr.com/8283/7...914640_b_d.jpg

So I've replaced that with a more appropriate mount from Ram directly [ Link]

http://farm9.staticflickr.com/8156/7...66fd7f_b_d.jpg

I do have tape there, just to protect the bar, but it's not slipping.

Hope that helps.

Jon

xphase 03-09-12 10:20

Quote:

Originally Posted by Metzy (Post 178356)
How about a mount for the bar above the speedo to mount a GPS. Maybe a aluminum block that you can screw a threaded ram mount ball into. The bar is 12mm in diameter and the smallest the ram mounts go down to is for 13mm round bar. Screw in threaded ram mount ball link

That's already on the "to do list".... ;)

xphase 25-09-12 15:33

Just to have you guys updated!

I have got my first prototypes from the fabric, and just mounted them on my bike and it fits really nice. Just have to bend the wings in correct angles and then anodize them to get the final results. I will keep you updated as soon as I have any pictures for you! :)

Metzy 17-10-12 02:20

Just wondering how the rear racks are moving along.

xphase 17-10-12 07:45

I soon have the first prototypes finished! They will be on anodizing in the end of this week, so in the next week I will have some product photos with the final result to show you! :)

xphase 18-10-12 20:32

Here are some crappy teaser images... (please be aware that they are not finished yet!)
http://img.tapatalk.com/d/12/10/19/ebu5aseb.jpg
http://img.tapatalk.com/d/12/10/19/a9a3yjeh.jpg

coxwain 23-10-12 20:33

anymore up dates on this

xphase 23-10-12 21:20

They are on anodizing right now, will have them back next week! *excited!!* :)

Later on, if there are any interested in these rackets. I need to order � minimum of 10 at once to have the price down to � satisfied margin. It will be around $120 for the smaller one i think!

xphase 30-10-12 11:20

Soon they will arrive........

xphase 13-11-12 17:17

Ok, finaly some updates.... It took a little bit longer than I thought to have them anodized. But now they are finished!

This is how they look like (sorry for the bad quality, I dont have any better camera available just now):

Small one:
http://www.xphase.se/temp/top_racket/svart_ram/bild1

http://www.xphase.se/temp/top_racket/svart_ram/bild2

http://www.xphase.se/temp/top_racket/svart_ram/bild3

Extension plate:
http://www.xphase.se/temp/top_racket/svart_ram/bild4

http://www.xphase.se/temp/top_racket/svart_ram/bild5

http://www.xphase.se/temp/top_racket/svart_ram/bild6


All times are GMT +1. The time now is 14:36.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.