.: XT660.com - The #1 XT660 Resource :.
Page 4 of 15 « First 2 3 4 5 6 14 Last »
Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   Its Here At Last Kev's Tenere Fuel Mod ( https://www.xt660.com/showthread.php?t=11641)

cdo1uk 27-10-09 16:45
what do i do with the other one then? i thought you fitted both onto the conector block??????

uncle ricky 27-10-09 16:59
Quote:
Originally Posted by cdo1uk (Post 110024)
what do i do with the other one then? i thought you fitted both onto the conector block??????

You leave the other wire intact, snip the blue and black one and connect both end into the connecting block one in each hole at the same end, then connect the mod wires to the other end so you are basically making a loop.

PM me and I will phone you

cdo1uk 27-10-09 21:07
First of all... a big thanks to uncle ricky... cheers mate, you where a great help.

Well, just got back after fitting my dna top and K&N filter along with the Kev fuel mod.... its very easy to fit it all, and once uncle ricky told me about the wire cutting it was done in half hour..... anyway..... the power is very different, its like a different bike, very very happy, thanks KEV....

uncle ricky 27-10-09 21:11
Quote:
Originally Posted by cdo1uk (Post 110092)
First of all... a big thanks to uncle ricky... cheers mate, you where a great help.

Well, just got back after fitting my dna top and K&N filter along with the Kev fuel mod.... its very easy to fit it all, and once uncle ricky told me about the wire cutting it was done in half hour..... anyway..... the power is very different, its like a different bike, very very happy, thanks KEV....
Glad to be of help :slywink:............., just don't ask me to text:hippy2:

cdo1uk 27-10-09 22:37
Quote:
Originally Posted by uncle ricky (Post 110094)
Glad to be of help :slywink:............., just don't ask me to text:hippy2:

that bad ah.... :014:

Kev 28-10-09 01:02
Thanks Rick, you have just been made my technical assistant with the XTZ fuel mod.
:eusa_whistle:

uncle ricky 28-10-09 10:30
Quote:
Originally Posted by Kev (Post 110131)
Thanks Rick, you have just been made my technical assistant with the XTZ fuel mod.
:eusa_whistle:

Do I get a certificate :walk1:

Kev 28-10-09 11:46
Quote:
Originally Posted by uncle ricky (Post 110154)
Do I get a certificate :walk1:
You get one of these from me. :HappyRoll_ANPIUI:

warnabrother 19-01-10 12:41
is the pot inside the same 0 -1K ohm as used on the "x" model ??

anyone measured the resistance of the O2 eliminators ?

Cheers

BFH 14-02-10 15:27
well i had abit of time spare this afternoon, so i fitted the Kev mod and DNA Filter and top...i gave it a run around and i'm well chuffed, nice bit of induction noise mixed with a little more punch has transformed the Ten's ride...it no longer feels asmatic and adequate...so thanks Kev quick despatch from Aus

Gaz


All times are GMT +1. The time now is 10:37.
Page 4 of 15 « First 2 3 4 5 6 14 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.