.: XT660.com - The #1 XT660 Resource :.

Page 1 of 4

Last »

Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- Performance Modifications & Enhancements ( https://www.xt660.com/forumdisplay.php?f=52)

- - rpm increase ( https://www.xt660.com/showthread.php?t=801)

tasos_z

22-09-06 00:28

rpm increase

Hi can anyone tell me how to increase the rpm of my bike from 1080 to 1300rpm?Thanks

Kev	22-09-06 01:56

2 Attachment(s)

Quote:

Originally Posted by teza

Hi can anyone tell me how to increase the rpm of my bike from 1080 to 1300rpm?Thanks

In the photos you will see a screw on the right of the photo, turn this screw clockwise & this will increase the idle speed. I would set your idle once the engine is warm to around the 1500rpm mark.:023:

tasos_z

22-09-06 15:17

thanks for the reply kev and another question how can i see the idle rpm in the screen panel?or i cannot?

Kev	22-09-06 15:41

Quote:

Originally Posted by teza

thanks for the reply kev and another question how can i see the idle rpm in the screen panel?or i cannot?

Switch off Engine Run switch, switch OFF Key switch.

1/ Press both SELECT & RESET buttons and then switch ON Key switch, keep SELECT & RESET buttons pressed for at least 8 seconds. Display then changes to "DIAG". Release SELECT & RESET buttons.

2/ Press the SELECT button once until CO displays, press SELECT & RESET buttons again & hold, CO1 should display.

3/ Once selected CO1, switch on the kill switch & crank the motor. Once started the rev counter should be in the right side of the LCD screen.

tasos_z

22-09-06 16:38

:icon_thumright: thanks

Tromso

05-05-07 20:06

Quote:

Originally Posted by Kev

Switch off Engine Run switch, switch OFF Key switch. Press both SELECT & RESET buttons and then switch ON Key switch. Keep SELECT & RESET buttons pressed for at least 8 seconds. Display then changes to "DIAG". Release SELECT & RESET buttons.
Select CO1 mode by pressing the SELECT button.

Once selected CO1, switch on the kill switch & crank the motor. Once started the rev counter should be in the right side of the LCD screen:occasion15:

'

Will the rev counter bee there "for ever" or just to the next time you turn the engine of and on?

nein	05-05-07 20:37

Quote:

Originally Posted by Tromso

'

Will the rev counter bee there "for ever" or just to the next time you turn the engine of and on?

If you want to see the rev counter you have to repeat these steps every time before you start the bike.

Tromso

13-05-07 00:55

Quote:

Originally Posted by nein

If you want to see the rev counter you have to repeat these steps every time before you start the bike.

Thanks

stevechol

13-05-07 03:54

Hi. I cannot see any photos, can you tell me where the idle adjustment screw is please ? Cheers - Steve

Quote:

Originally Posted by Kev

In the photos you will see a screw on the right of the photo, turn this screw clockwise & this will increase the idle speed. I would set your idle once the engine is warm to around the 1400rpm mark.:023:

Kev	13-05-07 04:36

1 Attachment(s)

Idle screw.

All times are GMT +1. The time now is 11:47.

Page 1 of 4

Last »

Show 40 post(s) from this thread on one page