![]() |
![]() |
![]() |
|
|
Newbies Reception Lounge Newbie introduction forum, just say hi and show us your bike, tell us where you're from and how you've found us, and see how many will welcome you aboard!! |
![]() |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
Mt03 660
Hi I have an 2014 MT03 660. Are there any other MT03 owners here? I live near Brisbane Australia. I'd like to find out about mods for my model. There's some info about later models on the internet and also earlier models but some how the 2014 model seems to be forgotten.
|
#
2
|
||||
|
||||
![]() ![]() Send a pm to Kev he is also in Bris Vegas and he happens to be our in house mechanic guru, ask him what mods you can do to your MT-03, I am sure he knows a few. Cheers. |
#
3
|
||||
|
||||
Does your bike have a 02 sensor?
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 ![]() |
#
4
|
|||
|
|||
No There is no O2 sensor. I checked that out. I see most of what you do is for bikes with O2 sensors.
|
Sponsored Links |
#
5
|
||||
|
||||
Quote:
Cheers |
#
6
|
|||
|
|||
I run an MT03 at present, let me know if you want any info, mine is a 2008
|
#
7
|
||||
|
||||
Ask Kev!
![]() ![]() ![]() ![]() ![]() |
#
8
|
||||
|
||||
Are you sure your 2014 model does not have a O2 sensor as the MT03 came with them from 2009?
Pre 2009 they had no O2 sensor. This is where your O2 sensor should sit: ![]()
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 ![]() Last edited by Kev; 23-01-18 at 10:16. |
#
9
|
|||
|
|||
Yes It has. I was looking higher up on the headers. Your photo made it a lot clearer.
|
#
10
|
|||
|
|||
![]()
Thanks to Kev for fitting the fuel mod to my MT03. As the exhaust is still standard he said there was no point in fitting the o2 mod. There is a noticeable difference in the smoothness of the bike but I'll have a chance to check that out on some of the roads I'm more familiar with in the next week or so.
It was an interesting morning watching him flash an XSR900 &, Kev if you ever want to sell that MT 09 you have let me know. |
![]() |
Thread Tools | |
Display Modes | |
|
|