|
|
|
|
|
|
|||||||
| XT660Z T�n�r� Tech Section Tyres, Mods, Luggage & Long distance preparation |
 |
|
|
Thread Tools | Display Modes |
|
#
1
 05-08-17, 03:39
|
|||
|
|||
|
Fork seals
Advice please. My fork seals have started leaking (quite bad) on my XT660Z.
Does anyone have any links to a thread, videos or a website that might guide me through replacing them? Is it worth replacing front springs for Ohlin and fitting a V4S valves whilst I've got it apart? If so, is there a UK seller someone can recommend? |
|
#
2
05-08-17, 11:59
|
|||
|
|||
|
you don't have to take the forks apart to get the seals out...
drain the oil / remove the springs / remove the clips that hold the seals in.. pump them up with air... they will pop out... usaly 80 to 100 psi dose it... ...
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
|
#
3
05-08-17, 14:39
|
|||
|
|||
|
The Ohlins springs I purchased from Off the Road have transformed the front end of the Tenere. I have the VS4 valves. ..I bought these from Teknik Australia but I don't know of a UK supplier . It's not an 'imagined' improvement. ...it really sharpens up the front end and improves the handling all round. Steve
|
| Sponsored Links |
|
#
4
08-08-17, 00:56
|
|||
|
|||
|
#
5
08-08-17, 04:30
|
|||
|
|||
|
TheHeadhunter
There are plenty of how to videos on YouTube.
|
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
