![]() |
![]() |
![]() |
|
#
1
|
|||
|
|||
throttle body modification!!
hello guys! i recently had a small modification to my th. body!i cutted the half of the axle (like kennys mod) and bored with a dremel the entrance and exit but not the middle of the body as i left stock throttle plate!
this days here its raining a lot so i can't go out with my baby! ![]() so i decided to mod the throttle body again!i removed the body and the plate ! search my stuff and found an intake from my old car,i removed the throttle plate, its 53mm and the holes for bolds are the same with xt plate!tomorrow i will find a workshop that can bore my body and the plate!ill probably do it 2mm bigger (46mm) as my bike is currently with cans and stage "orestis" airbox ![]() what is your opinion may i should do it 3mm? more air=more power?im uploading some photos..
__________________
my dirty xtx youtube channel! http://www.youtube.com/user/20vtorestis?feature=mhee Last edited by 0restis; 21-03-13 at 23:10. |
Thread Tools | |
Display Modes | |
|
|