Saw this while perusing the Robber's of south Wales' website recently:

http://www.touratech.com/shops/008/p...535e689d652602

Not cheap, but could be worth it? It looks a lot like the Aus spec bikes oem filter (that is not available to order in Europe for some strange reason?!)...

Personally I still like the DNA filters, and they were very reliable in the dust on Heroes' - nothing came through, but then I was changing them every day... I say 'I' - I mean my spanner monkey of course, I was eating caviar and drinking fine wines...

Ta-ra!

J xx

__________________
"Where we're going, we don't need roads..."

JennyDakar.com

I mentioned these a while back with this link, they are well known Oz filters.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

This is the Off-the-Road filter:


it also costs around 50 euro and I think I will order from them instead of taking the risk of ordering from touratech and having to wait a few months.

__________________
www.tony-ontheroad.blogspot.com

... that's what I did: arrived a few days after payment. Don�t forget to buy some filter oil also (not included).

HJ

__________________
Riding the Mad Mule !! ... no more... went orange...

Hi,
just have a look at this: http://www.advrider.com/forums/showp...&postcount=433
The aussies have a foam filter as original equipment. In this post is the original Yamaha part number. Asked my local dealer in Germany. He told me, if I can get the part number, he would be able to order it as a spare part.

Regards

The ADV post says or Teneres may have a different filter box? Im guessing ours is the same without taking the filter out? Any ideas of price over here for the filter?

__________________
Previous bikes:TS50 - RD125LC - XT250 - ZXR750L3 - BMW 650 Funduro - BMW 1100GS - XT660Z Tenere

would be interested in an aussie filter too

I can get these filters, the problem is the postage cost to the UK a killer.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

G'day JMo

Yeap i'd say those are a dead ringer for the filters we have here in OZ

Hopefully this weekend will see me making the bellmouth entry complete with pre-filter skin. I'll post some pics when if i get it right

Cheers
Reg

__________________
MY CURRENT RIDE: XT660Z T�N�R�
MY OLD RIDE: well you all know who she was

what kind of postage costs are we talking Kev ?

just thinking what the cost would be for auz filter plus post does anyone have the part number then maybe we could approach an aussie dealer

cheers all