Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > Performance Modifications & Enhancements > Fuelling and Intake
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

Reply
 
Thread Tools Display Modes
  # 1  
Old 06-07-13, 19:36
dredd dredd is offline
Newbie XT-Moto
 
Join Date: Jun 2013
Location: preston
Posts: 4
dredd is on a distinguished road
fueling question

Hi ive have recently bought an 08 xtx which has leo vince x3 power commander stage 1 dna,ive seen this can be bought as a kit on ebay witch I think the guy before previous owner who I got it off did the mods,am I right in thinking the power commander has a base map out of the box?its just that the snorkel was still in place so the guy didn't know to remove it or block off the ais,my question is I have removed the snorkel and fitted a stage2 dna,i removed the snorkel 1st and ran the bike for a few days it was much better everywhere I then fitted the stage2 today is seems everything is ok,i know I need to download the correct map off kev but I am struggling to find the 9volt pc111 power adapter am I best taking the stage2 off till I get the right map?.the bike runs fine maybe a little of the surging is back low down but not a lot.
  # 2  
Old 07-07-13, 11:47
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
You will be fine for the short term, until you can load the correct map.

The cable you want. http://www.ebay.com.au/itm/DYNOJET-USB-9V-ADAPTER-FOR-POWER-COMMANDER-III-PC3-PC-3-/360685514206

http://www.ebay.com.au/itm/Dynojet-PCIII-USB-Power-Adapter-9V-Power-Commander-Battery-ADAPTER-/321137444091?pt=Motorcycles_Parts_Accessories&hash =item4ac54884fb

http://www.ebay.com.au/itm/Dynojet-Power-Commander-III-Software-USB-Lead-Power-Adapter-and-Stickers-/121139103734?pt=AU_Motorcycle_Parts_Accessories&ha sh=item1c347407f6

http://www.ebay.com.au/itm/DYNOJET-U...item1e7c33136a
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 3  
Old 07-07-13, 21:18
dredd dredd is offline
Newbie XT-Moto
 
Join Date: Jun 2013
Location: preston
Posts: 4
dredd is on a distinguished road
thank you for the reply kev I have sourced the parts today at my local cpc cost �4, I have just subscribed so will now do the remap tonight,cheers GREAT SITE!!!!!
  # 4  
Old 08-07-13, 11:21
SimonRoma SimonRoma is offline
XT-Moto SuperStar
 
Join Date: Feb 2012
Location: Rome
Posts: 907
SimonRoma is on a distinguished road
Welcome on board mate and Kev is simply the best!!!!!
__________________
(Now sold on, sob) 2011 Blue XT660X with gold wheels, was 26,500 km.
Engine mods: K&N Stage 1 filter, DNA Stage 2 filter, snorkel removed, Kev fuel mod fitted.
Plus: smoked Puig screen, Yam aluminium sump guard, Yamaha / Acerbis handguards, Givi Trekker aluminium side cases, Leo Vince X3 cans plus Kev front fork mod and Fender Xtender. Just fitted Michelin Road Pilot 3 tyres.

SOLD the XTX for a Super Ten 1200. And just bought a Raptor 700 so staying on here for some tips....
  # 5  
Old 08-07-13, 12:15
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Quote:
Originally Posted by dredd View Post
thank you for the reply kev I have sourced the parts today at my local cpc cost �4, I have just subscribed so will now do the remap tonight,cheers GREAT SITE!!!!!

Thanks for becoming a supporter mate, have a look in the ASK KEV section at the top of the threads under Power Commander Maps, all the PCV & PCIII maps are awaiting your downloads.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 21:05.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top