.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Fuelling and Intake ( https://www.xt660.com/forumdisplay.php?f=207)
-   -   fueling question ( https://www.xt660.com/showthread.php?t=21024)

dredd 06-07-13 19:36

fueling question
 
Hi ive have recently bought an 08 xtx which has leo vince x3 power commander stage 1 dna,ive seen this can be bought as a kit on ebay witch I think the guy before previous owner who I got it off did the mods,am I right in thinking the power commander has a base map out of the box?its just that the snorkel was still in place so the guy didn't know to remove it or block off the ais,my question is I have removed the snorkel and fitted a stage2 dna,i removed the snorkel 1st and ran the bike for a few days it was much better everywhere I then fitted the stage2 today is seems everything is ok,i know I need to download the correct map off kev but I am struggling to find the 9volt pc111 power adapter am I best taking the stage2 off till I get the right map?.the bike runs fine maybe a little of the surging is back low down but not a lot.

Kev 07-07-13 11:47

You will be fine for the short term, until you can load the correct map.

The cable you want. http://www.ebay.com.au/itm/DYNOJET-USB-9V-ADAPTER-FOR-POWER-COMMANDER-III-PC3-PC-3-/360685514206

http://www.ebay.com.au/itm/Dynojet-PCIII-USB-Power-Adapter-9V-Power-Commander-Battery-ADAPTER-/321137444091?pt=Motorcycles_Parts_Accessories&hash =item4ac54884fb

http://www.ebay.com.au/itm/Dynojet-Power-Commander-III-Software-USB-Lead-Power-Adapter-and-Stickers-/121139103734?pt=AU_Motorcycle_Parts_Accessories&ha sh=item1c347407f6

http://www.ebay.com.au/itm/DYNOJET-U...item1e7c33136a

dredd 07-07-13 21:18

thank you for the reply kev I have sourced the parts today at my local cpc cost �4, I have just subscribed so will now do the remap tonight,cheers GREAT SITE!!!!!

SimonRoma 08-07-13 11:21

Welcome on board mate and Kev is simply the best!!!!!

Kev 08-07-13 12:15

Quote:

Originally Posted by dredd (Post 189462)
thank you for the reply kev I have sourced the parts today at my local cpc cost �4, I have just subscribed so will now do the remap tonight,cheers GREAT SITE!!!!!


Thanks for becoming a supporter mate, have a look in the ASK KEV section at the top of the threads under Power Commander Maps, all the PCV & PCIII maps are awaiting your downloads.

:smilies0346:


All times are GMT +1. The time now is 21:05.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.