Thread: Tart Parts...
View Single Post
  # 1  
Old 04-05-09, 16:35
JMo JMo is offline
"This lady is not for turning" - Paris - Dakar Veteran
 
Join Date: Aug 2008
Location: Somewhere west of Laramie...
Posts: 823
JMo is on a distinguished road
Quote:
Originally Posted by filipindrijus View Post
hi just to ask is it possible to fit this leavers to Xtx 2006 ? thanks
If the XTX has the same master cylinder as the XT660Z, then the FZ1 brake lever will be fine - likewise if the clutch lever is the same thickness in the bracket/perch pivot as the Tenere (about 7mm), then the clutch side (GSXR600) should fit too - best thing to do is to compare your bike and a Tenere side by side and see if the levers are the same size/shape?

Note the clutch lever comes with a removable tab to attuate the cut-out switch for starting the bike in gear - so you can retain that function as required (I'd already disconnected the wiring on mine anyway).

xxx
__________________
"Where we're going, we don't need roads..."

JennyDakar.com