Thread: Fuel economy
View Single Post
  # 9  
Old 17-04-09, 12:08
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Quote:
Originally Posted by contrarian View Post
I have four holes drilled in airbox, snorkel removed, DNA stage I and stage II filters, OTR 2in1 pipes + silencer, db killer removed, no catalytic converter in link pipe, nology hotwire cable, iridiumx spark, PCIII, O2 eliminator and lambda removed.

But from all of this, I think a PCIII map that crazy german have pre-programmed for me is the biggest fuel eater. I plan on connecting the PCIII to a PC to have the map saved and posted on forum for investigation. I would like to see can I have a same or nearly the same performance without such crazy fuel consumption (sometimes even above 10l/100km!!).

I had similar to the above +, a 102mm big bore with 11:1 high compression piston, stage 1 hot cam, +2mm throttle body & I got 20kms/L. I now run with the standard cam as it is far better with all the above & now get over 20kms/L on the open road.

When I converted my bike from a 07 ECU with O2 sensor to a 05 ECU with no O2 sensor my fuel consumption improved greatly, I did pass this comment on one of the past threads.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946