|
Hi Sprocket
just fitted one last week!
I had to remove the mounting bracket from the metal mule one that was on there, remove the regulator to get access to the
lower engine mount bolt, take it out and fit up the plate, then use the longer bolt supplied with the kit. The plate should then pivot up into place where you can fit the rear bolt and spacer.
didnt have any issues with stuff getting in the way once i figured out which engine mounting bolt to remove
its a pretty solid plate, but i've got a pretty bad vibration/resonance on mine, will have to go back and nip all the bolts a bit tighter
Dave
|