Quote:
Originally Posted by
nikroc
Probably not going to be helpfull...BUT I got paranoid recently thinking my bike was gonna implode..
After checking the major things for tightness,which may help rule that out for you, it turned out to be...............................
One of the bolts holding the hand guard on..it had vibrated loose..30 seconds later I was happy again..hth.
|
Thanks Nikros, this is actually a great advice and I did have a similar issue when I replaced Barkbusters VPS plastics for Storm - for some reason, Storm plastics are supposed to be attached to the aluminium phrame by one screw from the front and a strange little bracket from the inside, which could never be tightened enough. I have added an extra screw from the front and that did the job.
Do you happen to know of any checklist of bolts I should go over, without having to take the entire bike apart? Thanks.