the prob with bike front brakes is you are trying to bleed the air out of the lowest part of the system..
any brake hose above the master cylinder dosn't help either the
air sits there as its the highest part.... Push the hose down till it
all below the master cylinder....

but I always take the master cylinder off the bars and put it on a old set of bars on the ground below the caliper.... always get brake pressure in 6/8 pumps
or so... but it's not so easy to do it this way on some bikes the way the hose is held in place...



..

__________________
Harley Davidson..
The easyest way to turn gasoline into noise with out the side efect of horse power...