Thread: Alignment issue
View Single Post
  # 10  
Old 12-05-17, 23:38
steveD steveD is offline
XT-Moto SuperStar
 
Join Date: Mar 2008
Location: Huddersfield
Posts: 767
steveD is on a distinguished road
Check that the tyre is correctly seated on the rim. There is a small bead which should be evenly spaced between the rim outer and itself. I say this because I had a similar slow speed wobble on my Ten, but recently had a puncture. I obvoiusly repaired the inner tube and reseated the tyre using WD40 as I was in a field miles away from anywhere. I used my small air pump powered by my bike and at around 40psi the bead seated perfectly and the slow speed wobble has gone.

Hope this helps.
Steve
__________________
If I'm not working, I'll be