View Single Post
  # 1  
Old 13-04-17, 09:44
Sonny91be Sonny91be is offline
SemiPro XT-Moto
 
Join Date: Jul 2016
Location: Belgium
Posts: 49
Sonny91be is on a distinguished road
chain adjustment

Alright guys,

I adjusted the chain some times now on the XT660Z. It is quite easy and done it many times, however I used to drive a ninja , on this bike the play upwards and downwards to check was 25mm ish. Now with the XT660Z they say 5 0mm in my Haynes manual. I adjust it but when I want to check if it is fine, I can't.

I take the middle point ( lowest point ) between the front and rear sprocket. I push the chain down fully and start measurement. I pull it up and measure the distance. I then adjust it to normally around 50 mm max. Now everytime I adjust I cannot measure it properly because the chain hits my swing arm. So how do you guys measure ? 50 mm play is too much to actually check for me, so I just do it on sight ( don't let it hang to tight or to lose and check with running it on a stand manually ).

thanks !

Last edited by Sonny91be; 13-04-17 at 11:54.