Quote:
Originally Posted by
ludicator
@majland
Could you post some detailed pics of the way the LED Headlight (
http://www.ebay.de/itm/2500-3200LM-H...var&hash=item0) looks installed on the bike?
I'm thinking about going the same route as you did.
The china spots are already bought (exactly like yours).
For the Headlights, I was thinking about
http://www.aliexpress.com/item/New-A...481965750.html
So...
- How do the cooling belts fit in the housing?
-- Were you able to use the rubber housing cover as it is or did it require modifications?
- Apart from the led ensemble itself (the one that actually replaces the stock bulb), are there any other relays / drivers or the likes?
-- If YES, where did you place it ?
|
- The cooling could be bend around and stuffed around the edges
- The rubber hosing can't hold it by itself since the lamp is a bitlonger. But i have som cable ties running behind it at holding it in place and added som insulating tape around the edges to seal it. The cable ties are around the bolts that holds the small plastic cover below the speedo. I'll post at picture of it but it does not show much. Forgot to take a picture of the bulb in place without the cover. The one i got is 22.35mm from the specs (se ebay pictures) and it looks like the one you are considering are even longer.
- I just strapped the driver with cable ties to the center structure that holds the front fairing. I'll se if i can take a picture of that as well.
So far i've only been riding in with temperatures below 5 degrees Celsius. But i hope that the spring will sone arrive and that i can heat test it this summer...
I expect that i will be an issue a hot summer day to let it sit idling for long. Unfortunately you can't turn the headlights off on the tenere, but i have a spare switch on the zen overland bracket so i'm considsering wiring it in so that i can turn the headlight off.
I considered butchering the plastic cover but it is afaik not available as a spare (only with wiring 11D-H4312-00 at ~38€ online)