View Single Post
  # 5  
Old 09-02-16, 10:22
majland majland is offline
Expert XT-Moto
 
Join Date: Aug 2013
Location: Denmark
Posts: 223
majland is on a distinguished road
Quote:
Originally Posted by Seahorse View Post
Settled on a M10 SS Cable Clip..... Not a very good fit initially, but a few strokes with a round file and a bit of lapping using emery cloth wrapped around the bar itself, soon ended up with a perfect fit. The Clip and U-Bolt are made of 316 Stainless Steel. The U-Bolt is M10...Substantial enough to allow sufficient tightening to ensure a firm grip.
So far the standard ram mount that came with my zumo has staid put. Just shortened it a bit to keep it of the fairing and it is also just an U arround like yours. But really like your damping. I'll probably make something similar if/when mine gets loose.



And with the scottoiler below and a dark puig screen



Picture of the rammount to the left

__________________
2011 Yamaha XT660Z ABS T�n�r�.
  • Puig +8cm dark screen, Garmin Zumo 220, Scottoiler eSystem v2
  • Barkbusters Storm with external weights, Noname 30mm bar risers & EzMoto alu. levers
  • Kev's O2 Controller, Mccoi stepless controller with Hein Gericke heated grips
  • TT +4cm seat, Pivot Pegs, Altech stainless sprocket cover