|  
        Difference between the 2004 & 2007 XTX 
        
  
        Difference between a 2004 to 2006 & 2007 XT660X
        
 Looks 2007
 New tank side covers
 New fuel tank mounts points for side covers
 New radiator grill
 New rear foot pegs
 New rear grab handNes
 New head light & cowling
 New Swinging arm
 New Swinging arm chain guide
 New exhaust heat shields
 New radiator hose clamps
 New chain adjusters
 New frame protectors by your feet.
 
 Running gear
 
 2007 XTX
 Length 2,175mm
 Width 865mm
 Height 1,170mm
 Seat Height 875mm
 Weight 177 KGS fully fuelled & oil 186KGS
 
 2004 XTX
 Length 2.150mm
 Width 860mm
 Height 1,210
 Seat Height 870mm
 Weight 173KGS
 
 Rear wheel travel has been reduced for the 2007 XTX from 200mm to 191mm
 
 There is now a 2nd speed rating for the XTX to include 58H & 58W speed rated tyres
 
 We will be seeing different tyre brands on our new bikes from Yamaha, Michelin/Radial Pilot Sport, Metzerler/Sportec M1 & current Pirelli Dragon.
 
 XTR running gear, remains the same spec as 2004.
 
 Motor applies to both XTX & XTR
 
 2007 XTX has a different Engine ECU part number ending with 10. Remapped fuel injection using lambda control.
 
 2007 model has done away with the twin spark feature & now has single spark function.
 2007 XTX ignition timing has been reduced from 9 deg at 1500RPM to 5 deg
 
 2007 Min idle speed has been raised from 1300min to 1400 RPM
 
 2007 Torque is up from 58.4Nm to 60 Nm at 5250RPM
 
 2007 now has a O2/ lambda sensor
 
 Fault code 24 will be displayed on dash if O2 sensor is unplugged.
 Diag code 31 will display if the fuel mixture is to lean.
 Diag code 32 will display if the fuel mixture is to rich
 
 No real time display mode in Diag screen for the O2 sensor
 Lambda probe has 4 wires, 2 wires for lambda heater 12 volts input, wattage to be determined & a 2 wire lambda control 5 volts input, output voltage & amps still to be determined. Fuel mod pending info.
 
 There are new min wear spec's for the oil pump on the 2007, it may have a new pump or they have revised the min clearances. I will be able to tell once I get the parts manual.
 
 There is also a new ID mark for the throttle body on the 2007 5VK8-10 & 2004 5VK1-00. Can't see what has changed on the throttle body.
 
 Revised torque settings for all engine mounting bolts on the 2007.
 
 Wiring is the same on both bikes except for the addition of the O2 sensor wiring on the 2007 model.
 
 
 
 I'm sure there are more improved items on the 2007 model, I will add them as I find them.
 
 
         __________________
        Click here to join the XT Supporter's scheme
         
         
        Mods that I have done to my XTX's
         
         
        My 04 XTX
         
        Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /  [
         
        My 07 XTX
         
        Raptor 700 cylinder 102mm 
        /
         Modified Crank Case to take a 105mm Raptor Cylinder 
        /
         11:1 102mm JE Raptor piston 
        /
         Stage 1 Raptor Hot Cam 
        /
         Ported head
         /
         Colder Spark Plug
         /
         +2mm Throttle body 
        /
         DNA stage 1 & 2 filters 
        /
         Modified Air Box
         /
         Snorkel removed 
        /
         Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts 
        /
         Recovered seat in Black 
        /
         O2 Eliminator 
        /
         
         
        My 09 XTX
         
        59HP
         at the rear wheel 
        /
         Stage 2 Raptor Hot Cam
         /
         DNA stage 3 Air Box 
        /
         Carbon Can Exhausts 
        / 
        Modified Exhaust Link Pipes 
        /
         PCIII With Custom Fuel Map 
        /
         Wideband Commander O2 Data logger
         / 
        LCD100 Dyno Jet display & fuel adjuster 
        /
         2500 OHM HT lead instead of a 10K OHM XT lead 
        / 
        Extra Coolant Cooler 
        /
         Protaper Fat Bars
         /
         Tail Tidy With LED Tail Light 
        /
         OKE Protection Knobs 
        /
         LED indicators
         /
         AIS blocked 
        /
         Modified rear sprocket rubbers
         /
         Rear Foot Pegs removed 
        /
         09 ECU With 02 Sensor Changed To A 06 ECU 
        / 
        Complete wiring harnes Changed from 09 to 04 
        /
         Home made LED resistor flasher 
        /
         Hole drilled in the fuel tank filler neck to allow quicker filling 
        /
         Modified Bar End Weights 
        /
         Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer 
        /
         Changed front & rear guards from blue to black 
        /
         47T rear sprocket 
        /
         Speedo Healer V4.0 
        / 
        Kev throttle cam mod
         / 
        Throttle grip mod
         / 
        The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details
         
         
        Now ride a 2018 MT09SP ABS + TCS
         
         
        My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946   
         Last edited by Kev; 14-01-08 at 11:23.
 |