on board Chris.

Which ever bar/riser combo you choose to go for (and there's a lot of choice out there), you need to factor in the limitations imposed by the length of the stock throttle cables on the XTZ (on how wide the bars are, and how high the risers are).

You can just about use a 30mm riser with the throttle cables as they are, less though if you choose bars wider or with more rise than OE. Clutch cable is slightly less of a problem. You can buy yourself an extra 10-15mm or so by re-routing both throttle cables outside and over (rather than under and through) the oil return pipe that goes into the left hand side of the tank (see pic.)

__________________