Thread: Upgrades
View Single Post
  # 7  
Old 29-06-14, 17:03
phil ten phil ten is offline
XT-Moto SuperStar
 
Join Date: Apr 2012
Location: Worcestershire
Posts: 337
phil ten is on a distinguished road
Quote:
Originally Posted by Petenz View Post
CR250 forks are all but a bolt in fit... use the same bottom bearing as the XT..
top bearing can be bought of the shelf... Makeing steering stops are also dead esy , then just drill 2 holes in the lower yoke to bolt them on....
The only thing to keep in mined MX forks have 300mm of travel but
the XT only has around 200mm of ground clearance...
I had mine revalved / travel reduced to 240mm....

required bearings...
Top.... 32906 , 30mm/47mm/12mm
Bottom... 32006 , 30mm/55mm/17mm
Have you got any pics? Never heard of those forks being used.

So apart from buying a different top bearing, they fit straight in?? Did you use the yokes too?