View Single Post
  # 9  
Old 09-01-14, 19:03
hebbo hebbo is offline
Expert XT-Moto
 
Join Date: Jul 2013
Location: London
Posts: 116
hebbo is on a distinguished road
Quote:
Originally Posted by Petenz View Post
most lightly it's going to be the front pin thats seized..
The rear pin fits in a rubber sleeve...
On the front pin pull the little rubber boot/seal off "it's toast anyway
& will need replaceing" Then get a spanner & see if you can turn the pin
to brake it free... It should be screwed into the caliper..
Replace both rubbers...
Thanks. Will give a try.
Is this rubber boot/sleeve specific for the Yamaha/Brembo calipers? Or can I get a general purpose one?

Thanks