Hi Folks,

Been scratching my head a bit over my Hyperpro-sprung front end and picked up on this thread....

I bought my Ten with Hyperpro progressive springs and Ohlins shock already fitted (by Touratech I believe). The set up the preveious owner had dialed in was pretty much spot on for me riding with full load, so I didn't adjust anything. But having recently ruined the off-road handling by switching the Metal Mule lowering link for the original, I've started to look at setting up the suspension from scratch.

So having looked at my front forks, I have discovered that the pre-load is fully wound on, and the forks have not been raised in the triple clamp. Having read the posts above, that doesn't seem right, especially as the bike was set up originally with the back end lowered. Any thoughts??

Thanks!!

Paul