Thread: heated grips
View Single Post
  # 9  
Old 12-11-13, 07:29
majland majland is offline
Expert XT-Moto
 
Join Date: Aug 2013
Location: Denmark
Posts: 223
majland is on a distinguished road
Quote:
Originally Posted by rs steve View Post
So am I right in saying you have used the switched wire behind the dash as the 12v feed to the relay? Or do you still need to run a 12v feed from the battery as well, quick description of what wire goes where would be dead handy
I only use the switched wire to trig the relay and then cables with a fuse directly from the battery. I also plan to use the same relay for some extra light.

try google for a picture of a relay intallation. This is just one of the fist hits.


Just forget atbout the switch that triggers the relay and wire you switched 12V directly to the relay. Enstead of the lamps you connect the controller for the heated grips.
__________________
2011 Yamaha XT660Z ABS T�n�r�.
  • Puig +8cm dark screen, Garmin Zumo 220, Scottoiler eSystem v2
  • Barkbusters Storm with external weights, Noname 30mm bar risers & EzMoto alu. levers
  • Kev's O2 Controller, Mccoi stepless controller with Hein Gericke heated grips
  • TT +4cm seat, Pivot Pegs, Altech stainless sprocket cover