Firstly Martin, welcome to XT660.com
Quote:
Originally Posted by
juxbo.X
The only thing I'm wondering is, that the Co setting on the dash was 26, which from my point of view is quite high in the combination with the PC.
Now I want to go back to the manufacturer setting of the Co value as my bike still has some minor problems with surging.
Does anybody now, how to get the standard Co setting?
|
The factory settings for CO were/are all different, unless you know what it was originally, then you will have to guess. If it has been raised, then it was probably by 15, so taking it down to 11 would be a starting point. Most riders seem to say 25-30 works best though. There is no harm in trying different settings. I'd start by going down in steps of 5 and see how it feels (you can always go back to 26). Just make a note of what you do/set each time you make a change.
You bought a bike with a PC fitted. Do you know what map is loaded? Is there any map loaded at all? Is it the right map? Does the map match the setup of your bike? That's probably something I would investigate too.