Hi guys, I live and ride in Colombia my xt660z. Tons of lost trails and plains and jungle ridding. When having a flat, and not help around, I use the side stand or the central stand of my tenere for breaking beds. Of course you have to muscle up the bike and be careful not to damage the rims, but I get the job Done in case there is no other choice. Tenere total 200 kilos or so helps to break beds.

I do have the motion pro bed breakers, and 3 sets of levers. The motion pro bed breakers are pretty but honestly it is no good idea to bring more weight than necessary, because I normally break beds with the levers and the bike. So I always leave them behind. The levers I have are 2 standard and the third is very wrench I have to loosen the 22 mm nut of the rear tire. Finally I had made a special nut with a 30 mm long # 14 alen bit with a 22 mm nut stuck to it for axle removal with one wrench.

I hope this helps.