View Single Post
  # 9  
Old 20-07-13, 15:23
Pleiades Pleiades is offline
XT-Moto SuperStar
 
Join Date: Aug 2010
Location: North Norfolk
Posts: 5,320
Pleiades is on a distinguished road
The crankshaft position sensor resistance you are looking for is 192-288 Ohms between the blue/yellow and green/white wires at the 2-way connector block.

It is probably worth checking the resistance value when it is starting and running OK and make a note of it. Then check it again when the bike fails to start and the 12 error code is showing up. (Measure it with the ignition switched off though)

Last edited by Pleiades; 20-07-13 at 15:36.