Hi guys,
Ive just put my bike back together after stripping it for a major freshen up. now when I start it it runs for about 15 seconds then just shuts down all together.(sometimes after 30 odd seconds). the bike has a power commander and is a 2004 model. im pretty sure all the plugs were reconnected correctly and no wires were cut or shorted out.

today it idled for a minute then soon as I went to take off it just died.

one thing is the engine light comes on when I turn the key on but it goes out when its running. then comes back on after it cuts out.

the bike was lying around with all fuel drained for 2 months so Im thinking there could be a problem with the fuel pump.

I tried working out the fault codes and all i could find was the following:
do1: 17
do3: 100
do5: 28
do6: 31
do8: 40
do20: on
do21: on
do62: 1

in the manual I couldnt work out what they actually mean, except for certain values etc.


any comments greatly appreciated!!!!