Quote:
Originally Posted by
steveD
In the end orf the can is a tube. They took this out and I could see that it is swaged up to fit at the mouth of the silencer and then narrows down to about 25mm. It is about 250mm long and the end is blanked. The last 75mm of the tube is perforated and it is this part that allows the exhaust gasses to escape out of the silencer.
They basically chopped 25mm off the end of this pipe and reblanked the end. I tried the can again and still too loud, they chopped another 25mm off and now I was happier.
To sum up the pipe allowing gasses out has perforations for only25mm of its original length.
I was not too bothered about having this shortened so drastically as it would be easy to enlarge the holes or add more.
|
This sounds completely different to my pipe. Got an Oval single Stainless MTC. I'm not too bothered about the noise level as I'm in the land of V-twins but it would be good to know I could lower the noise if need be. The only thing that comes out of my pipe is this (pic). Doesn't sound anything like what you've got.
