Quote:
Originally Posted by
Dancanovas
just installed by TT handguards to my 11 plate tenere and the levers seem to slightly tap the huandguards. just wondered if anyone had any suggestions or experience with these particular handguards. they are the closed TT ones
|
I fitted these with the original bar end weights.
Three things you can try.
1. Heat the outer ends in boiling water and bow out as much as you can.
2. Fit washer/s between the grips and outer end mounts - make sure correct outer diameter so as not to foul throttle movement.
3. Move brake and clutch lever inwards as much as possible.
Trouble is that the mounting arangements are not the best and any knocks will easily move them about a bit - great weather protection though.