View Single Post
  # 3  
Old 02-07-12, 02:46
Petenz Petenz is offline
XT-Moto SuperStar
 
Join Date: Dec 2011
Location: Christchurch , NZ
Posts: 1,016
Petenz is on a distinguished road
I lowered my XTR 50mm...
made a set of links 20mm longer
in the hole spaceing.. went from
90mm standard to 110mm
Every 10mm longer = 25mm drop..
they are easy to make..
I used 30mm X 6mm stainless flat bar...
Drilled 16mm holes @ 110mm spaceing
tack weld both links togeather then drill the holes
both are the same then..
__________________
Harley Davidson..
The easyest way to turn gasoline into noise with out the side efect of horse power...