[quote=Rybenuk;170677]Hi guys, a couple of quick questions regarding my recent 6000 mile/6 month service(bearing in mind I've yet to top 2600 miles yet)

:
(Total cost was �164.That about right?)
Dealers costs, what can you do
1. I fitted a centre stand myself (Yammy one) and the because the chain roller bolt is replaced by the bolt the left spring goes on, it states in the instructions to be tightened at 63nm. Now the mechanic who serviced bike said he`d never torque a bolt that tightly, probably only up to 30nm!? Now I've hand tightened it with socket ratchet(a b***** to even get that in behind the bolt) and it spins freely(i had actually overtightened it previously), but I`m worried about it coming off etc as I`m flying along. Surely Yamaha can`t be that wrong or am I reading it wrong off diagram? I couldn't even get a torque wrench in that space even if I wanted to its that small a gap.
If it's a 8mm bolt 30nm sounds about right. the only 63nm i can see in the manual is the sidestand mount it's a 10mm
2. Another chain adjustment question : Service manual says do it on side stand, but along with others on here and other advice, mechanic told me to sit on the bike and adjust it by hand tension(ie ignore the accurate measurements stated in manual and just do it by `sight` and `feel`) - I had wanted him to show me the correct way of doing it btw.
Personally I lay over the seat to compress the suspension 'mid way', the chain will be at its tightest, allow about 15-20mm slack
Farkling the bike I can do myself, but anything to do with drive train I`m paranoid and wanted to make sure that everything sounded right?
3. Unrelated, but my spokes after only 2500 miles are rusted to death. Has anyone got any joy from a Yamaha warranty claim as this is crazy. I know they are poor and its a common problem but they are bad, even after coating the whole lot in ACF-50 with a brush. If so, what is the process as my warranty runs out in June this year
Yep a common problem, hassle your dealer, some folks have had successful claims. I got bored one day and sanded and carefully painted mine, talk about losing your will to..........