so from this photo you'll notice that the front turn signals have been relocated into the headlight housing. This is very easy just a few cuts and soldering (use heat shrink to waterproof it all) and the are done, it was maybe a five minute job...buy the bulbs before you do it, they are part number 194NA



if you do this remember that you need to have a disconnect on the spot lamps in case you need to do some service work on the head lamp or gas tank, i use Deutsch DT Series Connectors, waterproof and easy to use, and available almost everywhere. They are available in 2, 3, 4, 6, 8, and 12 pin configurations

Because of using high output spot lamps you need to be aware of your volts so i also added a waterproof LED volt meter (also from ADVmonster)

*****turn spot lights off if motor is not running*****

these lights have a lifespan of 35,000 hours, so your battery will loose the battle