Quote:
Originally Posted by
Brad2011
Thanks Shane... will def keep that in mind! ok ill grab some rubber from clarks. Do you need to use a special kind of rubber/glue? any tips on where to place it... i've attached a pic of my bash plate as it is now...
|
Get a small can of Selleys Kwik Grip glue and use as per instructions, another item handy to keep in the workshop.
Interesting that you would get a lot of refletive noise from that plate with all those cutouts.
However it may be the resonance from the thickness of the material, ie if it were 4mm instead of 5mm it may be a higher pitch.
Cover as much of the plate as you would like with the rubber and copy the cutouts. If it were me I would cover most of it and stick the rubber down first then do the cutouts with a sharp blade.