Thread: Tart Parts...
View Single Post
  # 2  
Old 08-02-12, 14:55
dave530 dave530 is offline
SemiPro XT-Moto
 
Join Date: Jan 2012
Location: UK
Posts: 48
dave530 is on a distinguished road
Quote:
Originally Posted by JMo View Post
Hi Dave - unless Yamaha have changed the front master cylinder on the later versions of the Tenere, then the BRC541 should fit straight on...

I'm sorry I don't have these levers any more so I can't take a photo to show you what they should look like, but it is possible that ASV have put the wrong lever in the box (it has been known!)- 5mm is way out. An easy way to tell is that basically the pivot area should be the same shape as your stock lever.

I would check that the Tenere master cylinders are still the same across all years (someone on here should be able to confirm) first, then perhaps take a photo of the pivot area on the one you have, and ask ASV to confirm they have sent the correct lever?


I'm sure you'll get it sorted, and they are worth it believe me x

Jenny xx
brc541 turned up today for tenere 660 brake lever, fits perfect, original one they sent me was right box part number with the wrong lever inside as jmo thought. why are women always right?