Great mod, so to recap these are the Raptor parts required. Thanks for the parts list.

CAMSHAFT:HOTCAMS STAGE3 FOR RAPTOR700
VALVES AND SPRINGS:BLACK DIAMOND+2MM RAPTOR7
CYLINDER:105,5MM FOR RAPTOR700
PISTON:JE 105,5 12.5:1 FOR RAPTOR
CRANKSHAFT:HOTRODS +5MM FOR RAPTOR700 CYLINDER TO HEAD STUD KIT FOR RAPTOR 700
FLYWHEEL STARTER CLUTCH GEAR FOR RAPTOR700
STATOR ENGINE MOTOR COIL FOR RAPTOR700
YAMAHA RAPTOR 700 CAM CHAIN
Dynatek Ignition Coil Kit Yamaha FOR Raptor 700
CLUTCH BASKET IS FROM XT BUT I MUST CHANGE
AND MY XT SPIN.IT IS TOO MUCH CC FOR THIS
CLUTCH.
FLYWHEEL IS FROM RAPTOR BUT FLYWHEEL GEAR FROM XT660 ITS HALF.

Have you had it on the dyno? What HP are you getting?

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946