View Single Post
  # 4  
Old 28-05-10, 09:39
Old Git Ray's Avatar
Old Git Ray Old Git Ray is offline
XT-Moto SuperStar

 
Join Date: Nov 2007
Location: Regrouping in Scotland
Posts: 298
Old Git Ray is on a distinguished road
Quote:
Originally Posted by weeksy View Post
IT's only �6 on Ebay for the 1/2" drive 14mm... i can live with that.. but really wanted it doing today as i have spare time to get the rubber swapped over today...

Trying to think of any other way i can do it using 14mm nuts and bolts... but my mind isn't coming up with anything. I had a 14mm nut on both ends of a bolt, but obviously when i undo it, it just undoes the nut on outside... not the spindle... must be some way of improvising.....
How about a bolt and 2 nuts.

Lock the 2 nuts together on the bolt thread and then spanner the middle nut against the outside one with the bolt head in the spindle.

Does that make sense ???

(or use the wrong end of a cold chisel or bolster as I do !)
__________________
We are now retired....so....... lots of this and this and no more of this or this