Quote:
Originally Posted by
medo
we were talking before about sidestand switch ... if you been driving your bike for about 10 minutes and than stopped for getting some fuel on petrol station, means that you must have parked your bike on sidestand ... just try to remove that switch from its place and check weather plunger is moving easily ... I don't know for the moment if there is any possibility to dismantle it into the parts but it'll be good idea so you may check condition of interior parts, mainly contact surfaces and any sign of corrosion
|
The bike was on paddock stands before I rode it. You're right, when I was at the petrol station it was on the side stand...that's when it stopped working.
I forgot to mention that I also tried connecting the black and blue cable together to bypass the sensor (using a scredriver to connect the two pins) but it didn't work. I then disconected the battery hoping that it would reset the ECU so the fault would be cleared...still no luck.
Not sure if the senor can be dismantled, looks like a sealed unit. I'll give it a go though. Thanks for your help
