Okay, I've finally taken off the bike and measured them up. So here are some more piccy's and a stencil.

If you print this out and enlarge/shrink so the dimensions shown match in real life, you'll have something pretty close.

Materialwise all I had was the orange plastic off an old A4 notebook, so if you hunt around you should find something suitable, even in pink, if that's what revs your enjin.




(there are two holes on the left side...ignore the upper one, that was a mistake...its correctly marked on the template above, this pulls the side round and up to give it a quite good shape (IMHO))



This is the screw I used. I made a pilot hole in the original side piece of the handguard (this is the only modification to the original)

and here you can see it in situ...

__________________
www.reeves-cartoons.co.uk
centrestand, handguards and deflectors, scottoiler, handlebar muffs, panniers, cush drive mod, compass, power socket,
petebog rack, handguard extenders, satnav, tank bag...to be continued