View Single Post
  # 2  
Old 24-02-10, 10:20
gianni1951 gianni1951 is offline
Expert XT-Moto
 
Join Date: Nov 2009
Location: Asso - Como
Posts: 61
gianni1951 is on a distinguished road
Quote:
Originally Posted by duibhceK View Post
I can get my hands on a cheap Memjet module through a friend. But it seems to be for '04-'08 XT-X and XT-R.

Does anyone know whether this will work on an '08 XT-Z? Do they use the same plug for the air intake temperature sensor?
Hi,

if you want a suggestion, don't use a Memjet module. Use a Kev mod. It's better and cheaper.

Some mounths ago, I purchased a memjet and I done many many test. it running good, but bypass completely the temperature sensor and practically, at the end you use a fixed value of resistance (about 6 Kohm). This value can't is right for summer like winter. I done very much test, I wrote also to factory that confirmed me my suspect.

So, now, I have modified the circuit in order to use Memjet like Kev mod. I assure you that run better.

I attached some pics of my mod to Memjet with the two use mode. In first position I use the Memjet like buyed. It means that I have a fixed value of 6 Kohm to ECU (about 2� Kelvin to display). In second position, I use Memjet in series to temperature sensor. It means that I have the resistance of temperature sensor plus a fixed (by me) value of 0,9 Kohm. (on display the real temperature minus 9� Kelvin.

I understood that you have a Tener�, but I assure you that's the same like mine.

If you are interested in that, ask me, and I can explain better and also show you the mail that I had in replay to my doubt by DM meccanica (factory).

http://www.memjet.it/

Ciao.







__________________
Mess with the best, die like the rest.