Quote:
Originally Posted by
DNA
Hi Banksy,
Nice thoughts let me explain.
DNA has developed the Stage 2 air box cover TC-Y6E08-S2 for the XT 660 Z as a bolt on replacement cover, that in combination with the DNA filter R-Y6E08-01 will highly increase the air flow to the engine and at the same time provides maximum filtering.
The result in air flow is Massive! +56, 82% from stock. The stock intake (snorkel) flows 73,26 cfm @ 1,5 H2O, and the DNA Stage 2 intake 114,9 cfm�!
So if you are going to use the above combination and allow +56,82% of air to enter your air box, you MUST check fueling and re-program your fuel injection, it is common sense.
DNA as a serious and very professional company informs all customers that purchase the Stage 2 Air box Cover, including an instruction sheet with every cover.
As you can see we provide all the necessary info with our products, first of all to protect you the customer from damaging your engine and us the manufacturer against product liability.
And by the way, we do not recommend using the XT 660 Z DNA Stage 2 air box cover with other Manufacturers filters, it is brought to our attention that it will not seal properly allowing dirt to pass thru towards the clean side of the air box.
I hope the above answers you questions,
Looking forward to hear from you,
Dino
|
Hi Dino,
I have an XTZ with Apropovik exhausts. I have just bought the DNA air box cover and realised that I need some kind of fuel mod prior to fitting it. As this is the case I thought I might as well go to the full stage 3 mod (air filter and snorkel replacement). To get the best out of this mod am I right in thinking that I will need a power commander? Also is there a fuel map available for this configuration?
Regards
Colin