.: XT660.com - The #1 XT660 Resource :.

Page 2 of 2

Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- XT660Z T�n�r� Tech Section ( https://www.xt660.com/forumdisplay.php?f=163)

- - Rear Indicator Housings ( https://www.xt660.com/showthread.php?t=9400)

Biking

13-03-09 15:53

Mine are muddy too but I won't have them replaced under warranty because the new ones are going to have the same problem.

schiptje

13-03-09 20:47

Why Biking? Aren't they improved. With some sealings or so?

BadgeStar

13-03-09 21:51

Quote:

Originally Posted by Ian M (Post 84404)

Yep , mine was the same filling up with muddy water after a trail ride ! I tried a smear of grease around the lens but it made no difference to mine , the solution I used was to silicon the wires where they entered the indicator .

The water etc thrown up by the rear wheel was running along the cable and into the indicator that way - all ok now .

Thanks for the 'Heads-up' on this . I have just sealed the wires on mine up with silicon gasket seal before I get any problems.

Barry.

gregor

17-03-09 14:53

Quote:

Originally Posted by BadgeStar (Post 85790)

Thanks for the 'Heads-up' on this . I have just sealed the wires on mine up with silicon gasket seal before I get any problems.

Barry.

I did that with the number plate light and indicators.But water still gets in around the lens on the indicators.

Better to re-position them higher up I think, no such problems with the front so far.

All times are GMT +1. The time now is 07:38.

Page 2 of 2

Show 40 post(s) from this thread on one page