.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Fuelling and Intake ( https://www.xt660.com/forumdisplay.php?f=207)
-   -   pcIII map ( https://www.xt660.com/showthread.php?t=6993)

stan 26-06-08 20:05

pcIII map
 
Do anyone hawe a map i can use with leo vince slip on,dna sage 1 and 2 and otr camshaft??? dont need to be a perfect one,just one i can start with...

Tanks...

maxx3 26-06-08 20:29

prova questa

http://digilander.libero.it/massimop...Leo%20dna2.djm

CaptMoto 26-06-08 20:31

Quote:

Originally Posted by maxx3 (Post 60159)

Maxx3 said try that map, see if it works

Kev 27-06-08 00:30

In the Ask Kev Section for supporters we have 39 fuel maps with different combinations. :smile[2]:

http://www.xt660.com/showthread.php?t=2887

Gravityfreak 27-06-08 01:43

OTR camshaft
 
Quote:

Originally Posted by stan (Post 60155)
Do anyone hawe a map i can use with leo vince slip on,dna sage 1 and 2 and otr camshaft??? dont need to be a perfect one,just one i can start with...

Tanks...

Hey mate - have you fitted the OTR cam already and if so - what are your impressions?

With all those changes - I'd definitely invest in some dyno time rather than using a stock or someone else's map.

stan 27-06-08 17:58

Quote:

Originally Posted by Kev (Post 60180)
In the Ask Kev Section for supporters we have 39 fuel maps with different combinations. :smile[2]:

http://www.xt660.com/showthread.php?t=2887

I don't have acsess to this site,don't know way....

stan 27-06-08 18:06

Quote:

Originally Posted by Gravityfreak (Post 60188)
Hey mate - have you fitted the OTR cam already and if so - what are your impressions?

With all those changes - I'd definitely invest in some dyno time rather than using a stock or someone else's map.

I have fitted it,but still waiting for the gasgets to arive,so i have not started it yet...
I'm thinking about bying a 2-1 system dont know witch yet but i think a will try a dyno run after that... I reely like the one they have at off the road,the carbon arapovic one... but ecspensive...

motonacio 27-06-08 18:58

Quote:

Originally Posted by stan (Post 60234)
I don't have acsess to this site,don't know way....

You need to be an XTSupporter to access the Ask Kev sections.

Click on the link in my signature below for details.

Kev 28-06-08 01:20

Quote:

Originally Posted by stan (Post 60235)
I have fitted it,but still waiting for the gasgets to arive,so i have not started it yet...
I'm thinking about bying a 2-1 system dont know witch yet but i think a will try a dyno run after that... I reely like the one they have at off the road,the carbon arapovic one... but ecspensive...


Hi Stan, have you managed to get into the Ask Kev section?

What gaskets are you waiting on, you don't need to change any gasket when changing the cam shaft over.

Try my big bore with stage 1 cam fuel map.

http://www.xt660.com/showthread.php?t=2887

700 big bore + stage 1 hot cam
Raptor 700 11:1 piston
Stage 1 Hot cam
Carbon Cans
DNA stage 1 & 2 filters
O2 Eliminator
Snorkel out
CO1 set to Zero
98 RON fuel
AIS blocked
56.92hp @ 6500RPM
49.30ft-lbs @ 5500RPM

stan 28-06-08 10:28

Quote:

Originally Posted by Kev (Post 60265)
Hi Stan, have you managed to get into the Ask Kev section?

What gaskets are you waiting on, you don't need to change any gasket when changing the cam shaft over.

Try my big bore with stage 1 cam fuel map.

http://www.xt660.com/showthread.php?t=2887

700 big bore + stage 1 hot cam
Raptor 700 11:1 piston
Stage 1 Hot cam
Carbon Cans
DNA stage 1 & 2 filters
O2 Eliminator
Snorkel out
CO1 set to Zero
98 RON fuel
AIS blocked
56.92hp @ 6500RPM
49.30ft-lbs @ 5500RPM

Yes,i got in to the ask kev section just fine....
When i was changing the camshaft i droped one of the bracket's down into the engine,so i had to take of the side cover to fish it out. So that's the gasket that i am waiting for.
But don't worry,i am now driving a yamaha fz1 that i borroud from work,i work at a yamaha dealership you see...


All times are GMT +1. The time now is 13:23.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.