yep, thats right.

Just a thought.....

When i first fitted mine i could barly make them move/pivot upwards. What i did was slightly file down the end (or edge?) of the peg - the bit the sits against the foot peg holder bracket. I'll try and take a photo.

XTR Different?
 

Thanks for the responses chaps.

I have now done a little more research to confirm that the XTR and XTZ have very different springs. Ten springs fit a wide range of Yamaha bikes, per the list in the link http://www.yamahamotorcyclespares.co...%3C%3C55&uid=0

Whereas, the XTR only fits XTR/XTX and in some cases, by model years. The upside is that the Ten's springs are under �3 as opposed to the R/X at over �7!

I will order some Ten springs and hopefully solve my problem :)

For R owners reading this, the opening of the R footpeg, near the frame is quite closed [refer picture] so the spring ends resemble more of a "U" shape.
https://lh3.googleusercontent.com/-Z...kf74211000.jpg

The replacement footpegs have a wider opening and the spring no longer has a "ledge" to rest upon - therefore, not creating sufficient spring tension.

Do pegs for a WR250/450 fit the Teneres, does anyone know ???