![]() |
Quote:
As for the high front fender, i want one not from a practical point of veiw, pure and simply because the only part of the bike i dont like the styling of is the low fender. Still unsure of what make/model to use. Have folks found most fenders will fit with minor cutting? I know a few folks have fitted the wr400 side pannels, how did you find fitting them? Much cutting needed? |
hi, i've been using this type for the last 2 years, works well, even in the desert, no problem with overheating, the angular shape suits the tenere well!
http://www.ebay.co.uk/itm/NEW-UFO-KT...item41498e6873
http://i192.photobucket.com/albums/z...llyprep019.jpg as it's an '08 have you checked has it the '09 modified oil breather? +1 on the t63's. great tyre i'm with uber- less bling! more practical stuff! oh yeah, all the best with your new ride! consider also a chain guide! |
Quote:
Springs wise im looking at hyperpro replacements to go in the standard forks and something along the lines of an ohlins on the rear! For amature enduro spring wise, what am I realistically looking at? Are the standard springs good enough? As for the modified breather im not sure what your on about. The bike is an 09 model on an 08 plate, not sure how that one works out lol |
You mean, an 08 bike on a 09 plate. They only made the racing gold for 08, itsthe most original colour.
|
I have oiled foam in mine now with the side back on the air box..When I took my DNAs out to clean them the air box on the engine side of the filters was full of dust... Have lost a bit of power with the oiled foam.... but now theres no grinding paste going though it... Chose yer filters for the terrain yer ride in..DNAs would be great in a XTX...
|
Quote:
So first mod for definate is a seat remould, being a tall chap i just dont have enough movement in the standard seat. Has anybody got anyone they can recomend? Then it will be stage 1 DNA, kev fuel mod and zorst followed by springs. But shhhh dont tell the credit card or the missus! Haha |
www.rayz.nl
(not mine) http://ontour.smugmug.com/Travel/Ray...48_T2NzM-O.jpg http://ontour.smugmug.com/Travel/Ray...61_KoVsF-O.jpg ... but he's in holland. Excellent stuff though. Hand made to your specification. ... expensive also. About as much as a Kahedo |
Quote:
Allthough the company isnt uk based it gives me a good idea of the kind of shape I want. Taa |
** -- Thread Title Change -- **
|
Quote:
As for the side panels - I think you mean the (Honda) XR400 ones, rather than a WR? http://i492.photobucket.com/albums/r...t/DSC00696.jpg http://i492.photobucket.com/albums/r...t/DSCF3334.jpg They are very east to fit - the lower hole lines up with the upper pillion footrest bolt, and the upper hole you need to use a spring clip with a captive nut on the flat plate/brace on the subframe (you'll see where I mean when you offer the panel up)... then just cut a slot/trim around where the rear grab handles sit: http://i492.photobucket.com/albums/r...n/DSC01137.jpg Have fun! Jx |
All times are GMT +1. The time now is 09:08. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.