.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   My Tenere Mods. ( https://www.xt660.com/showthread.php?t=18730)

Chris1811 16-03-12 16:47

My Tenere Mods.
 
Hi all,

So with the collectiin of my bike looming I just can't hold it in any more. Ive decided to make a post to discuss and follow my planned mods.

Idea is over the next year or so to creat a amature big ralle bike and break into the world of enduro!

So planned mods are:

Stage 1/2 DNA filters
2 into 1 MTC exhaust
DRC anato tail tidy
WR400 side panels
High front fender (ive found these on racespec.co.uk but not sure what type I need)
Remould seat
Pivot/bigger pegs
AUX HID lighting kit
Renthal/protaper bars
Barkbuster/similar handguards (it currently has yamaha ones on it)
New springs and oil in front forks
TKC80s or back to the tourances
Fix rectifier (has this been rectified on the 09 models?)

And that for now is about it.

First jobs on the list are the high fender! Ive found some made by polisport but not sure what model to use, any ideas?

What do folks suggest doing first.....exhaust or DNA filters?

Any other things that ive over looked with regards to the filters and zorsts?

Looking forward to the lakes now and being able to get it mucky (or wet as it usually turns out)

Cheers all

Gas_Up_Lets_Go 16-03-12 17:13

If you go with the DNA filters, you'll need a Kevmod or PC-V.

Personally, the filters make a bigger difference than the Zorst, but the MTC zorst does release lots of low down grunt.

Don't knock the Yam OE guards, try them out first, they are way stronger than they look (I know, I've crash tested them, more than once..) I broke mine because I tried to lift the bike by them - stupid thing to do!

TKC's, (or if UberT is watching, them mitas things) because you'll have more fun, and getting stuck on a grass field with chite tyres is no fun... especially for the SteveD who has to push you out!

Chris1811 16-03-12 17:28

Am i right in thinking that dna stage 1 on the ten is the airbox top and filter and stage 2 is the side pannel?

I been searching for it on here to read up more but when you type in DNA it syas its too few letters.

Ah yea cheers Mr gas i didnt think about the kev mod! How much am I looking at then for kev mod plus S1 and S2 filters?

Gas_Up_Lets_Go 16-03-12 17:38

Use "dna" as the search string, with the " " marks.

DNA Stage 1 - Snorkel removal, it's a cover
DNA Stage 2 - High Flow air filter
DNA Stage 3 - Side cover w/ filter

Some have just cut out the snorkel and used the ring that's left, but, the DNA one is much more rigid than the 'adjusted' Yamaha part, and holds the Stage 2 filter much better. But you can just about get away with the Yam park butchered.

You'll need to speak to Kev about his mod, and the Captain for a quote for the DNA, and if you want Zorsts, the Captian again.

Chris1811 16-03-12 17:55

Tried the search as suggested gas and it says sorry no matches!

Cheers for the info, ill give cpt fran a message.

uberthumper 16-03-12 18:02

If you're serious about rallying it, then forget about exhausts/filters/shiny baubles and sort the suspension first.

redbikejohn 16-03-12 18:32

see some of my mods here: http://redbikejohn.com/Tenere%20Owner%27s%20Review.htm

Beffo 16-03-12 19:37

Quote:

Originally Posted by Gas_Up_Lets_Go (Post 169632)

DNA Stage 1 - Snorkel removal, it's a cover
DNA Stage 2 - High Flow air filter
DNA Stage 3 - Side cover w/ filter

That is some useful information there. I've been trying to understand the stages as well. Thanks for clearing that up

Chris1811 16-03-12 19:38

Quote:

Originally Posted by redbikejohn (Post 169635)

Some good reading there buddy, thanks for that post!

SingleMinded 16-03-12 20:14

Quote:

Originally Posted by Chris1811 (Post 169629)
Hi all,

So with the collectiin of my bike looming I just can't hold it in any more. Ive decided to make a post to discuss and follow my planned mods.

Idea is over the next year or so to creat a amature big ralle bike and break into the world of enduro!

So planned mods are:

Stage 1/2 DNA filters - got stage 2
2 into 1 MTC exhaust - got LeoVinces
DRC anato tail tidy - not yet
WR400 side panels - not
High front fender (ive found these on racespec.co.uk but not sure what type I need) - no need (even in mud no problem)
Remould seat - got a Kahedo high seat: a flat seat will enable you to move around and shift your weight better
Pivot/bigger pegs - got pivotpegs
AUX HID lighting kit - got Xenon in low and high beam + double light mod
Renthal/protaper bars - got Magura tapered bar
Barkbuster/similar handguards (it currently has yamaha ones on it) - got Acerbis Multiplo
New springs and oil in front forks - got Hyperpro front + complete Hyperpro rear shock
TKC80s or back to the tourances - on TKC80 at the moment but prefer T63
Fix rectifier (has this been rectified on the 09 models?) - never needed it (even though it's a 2008 model)

Quote:

And that for now is about it.

First jobs on the list are the high fender! Ive found some made by polisport but not sure what model to use, any ideas?

What do folks suggest doing first.....exhaust or DNA filters?
- exhaust

Quote:

Any other things that ive over looked with regards to the filters and zorsts?
- do the Kev-mod to get the most of your inlet/exhaust mod's
- brake snake to prevent the brake pedal folding up
- 47T rear sprocket
- Off-the-Road bash plate: more protection down under

Quote:

Looking forward to the lakes now and being able to get it mucky (or wet as it usually turns out)
- Michelin T63 will perform better in mud then TKC80

With all these mod's your Tenere will be a very capable adventure bike!

This is mine:

Big picture: http://www.mijnalbum.nl/GroteFoto-MNHX8N7A.jpg
http://www.mijnalbum.nl/Foto-MNHX8N7A.jpg

in this picture I'm running an 18" rear wheel with a pair of Michelin Enduro Comptetion tires... during a rally training weekend

HJ

Chris1811 16-03-12 20:24

Quote:

Originally Posted by SingleMinded (Post 169639)
Stage 1/2 DNA filters - got stage 2
2 into 1 MTC exhaust - got LeoVinces
DRC anato tail tidy - not yet
WR400 side panels - not
High front fender (ive found these on racespec.co.uk but not sure what type I need) - no need (even in mud no problem)
Remould seat - got a Kahedo high seat: a flat seat will enable you to move around and shift your weight better
Pivot/bigger pegs - got pivotpegs
AUX HID lighting kit - got Xenon in low and high beam + double light mod
Renthal/protaper bars - got Magura tapered bar
Barkbuster/similar handguards (it currently has yamaha ones on it) - got Acerbis
New springs and oil in front forks - got Hyperpro front + complete Hyperpro rear shock
TKC80s or back to the tourances - on TKC80 at the moment but prefer T63
Fix rectifier (has this been rectified on the 09 models?) - never needed it (even though it's a 2008 model)



- do the Kev-mod to get the most of your inlet/exhaust mod's



- exhaust



- brake snake to prevent the brake pedal folding up
- 47T rear sprocket



- Michelin T63 will perform better in mud then TKC80

With all these mod's your Tenere will be a very capable adventure bike!

HJ

Cheers HJ some good alternatives there.

As for the high front fender, i want one not from a practical point of veiw, pure and simply because the only part of the bike i dont like the styling of is the low fender.

Still unsure of what make/model to use. Have folks found most fenders will fit with minor cutting?

I know a few folks have fitted the wr400 side pannels, how did you find fitting them? Much cutting needed?

stoic bloke 16-03-12 22:03

hi, i've been using this type for the last 2 years, works well, even in the desert, no problem with overheating, the angular shape suits the tenere well! http://www.ebay.co.uk/itm/NEW-UFO-KT...item41498e6873

http://i192.photobucket.com/albums/z...llyprep019.jpg


as it's an '08 have you checked has it the '09 modified oil breather?

+1 on the t63's. great tyre

i'm with uber- less bling! more practical stuff!

oh yeah, all the best with your new ride! consider also a chain guide!

Chris1811 16-03-12 23:09

Quote:

Originally Posted by stoic bloke (Post 169646)
hi, i've been using this type for the last 2 years, works well, even in the desert, no problem with overheating, the angular shape suits the tenere well! http://www.ebay.co.uk/itm/NEW-UFO-KT...item41498e6873

http://i192.photobucket.com/albums/z...llyprep019.jpg


as it's an '08 have you checked has it the '09 modified oil breather?

+1 on the t63's. great tyre

i'm with uber- less bling! more practical stuff!

oh yeah, all the best with your new ride! consider also a chain guide!

Cheers for the fender link, ill certainly be after one of those!

Springs wise im looking at hyperpro replacements to go in the standard forks and something along the lines of an ohlins on the rear! For amature enduro spring wise, what am I realistically looking at? Are the standard springs good enough?

As for the modified breather im not sure what your on about. The bike is an 09 model on an 08 plate, not sure how that one works out lol

Gas_Up_Lets_Go 17-03-12 08:35

You mean, an 08 bike on a 09 plate. They only made the racing gold for 08, itsthe most original colour.

Petenz 17-03-12 09:30

I have oiled foam in mine now with the side back on the air box..When I took my DNAs out to clean them the air box on the engine side of the filters was full of dust... Have lost a bit of power with the oiled foam.... but now theres no grinding paste going though it... Chose yer filters for the terrain yer ride in..DNAs would be great in a XTX...

Chris1811 18-03-12 20:09

Quote:

Originally Posted by Gas_Up_Lets_Go (Post 169656)
You mean, an 08 bike on a 09 plate. They only made the racing gold for 08, itsthe most original colour.

Figured it out now, the bike is an 08 model but it was registered in the latter part of the reg year I.e feb 09 so its on a 58 plate, thats were the 2008/2009 confusion is coming from.

So first mod for definate is a seat remould, being a tall chap i just dont have enough movement in the standard seat. Has anybody got anyone they can recomend?

Then it will be stage 1 DNA, kev fuel mod and zorst followed by springs.

But shhhh dont tell the credit card or the missus! Haha

SingleMinded 18-03-12 22:27

www.rayz.nl

(not mine)
http://ontour.smugmug.com/Travel/Ray...48_T2NzM-O.jpg

http://ontour.smugmug.com/Travel/Ray...61_KoVsF-O.jpg

... but he's in holland. Excellent stuff though. Hand made to your specification.
... expensive also. About as much as a Kahedo

Chris1811 18-03-12 22:34

Quote:

Originally Posted by SingleMinded (Post 169735)
www.rayz.nl

(not mine)
http://ontour.smugmug.com/Travel/Ray...48_T2NzM-O.jpg

http://ontour.smugmug.com/Travel/Ray...61_KoVsF-O.jpg

... but he's in holland. Excellent stuff though. Hand made to your specification.
... expensive also. About as much as a Kahedo

Thats a great pic cheers!

Allthough the company isnt uk based it gives me a good idea of the kind of shape I want.

Taa

Gas_Up_Lets_Go 28-03-12 08:41

** -- Thread Title Change -- **

JMo 28-03-12 12:18

Quote:

Originally Posted by Chris1811 (Post 169640)
As for the high front fender, i want one not from a practical point of veiw, pure and simply because the only part of the bike i dont like the styling of is the low fender.

Still unsure of what make/model to use. Have folks found most fenders will fit with minor cutting?

I know a few folks have fitted the wr400 side pannels, how did you find fitting them? Much cutting needed?

Having seen Stoic at the weekend, I was just going to suggest the KTM one on his bike, but I see he already has!

As for the side panels - I think you mean the (Honda) XR400 ones, rather than a WR?

http://i492.photobucket.com/albums/r...t/DSC00696.jpg

http://i492.photobucket.com/albums/r...t/DSCF3334.jpg

They are very east to fit - the lower hole lines up with the upper pillion footrest bolt, and the upper hole you need to use a spring clip with a captive nut on the flat plate/brace on the subframe (you'll see where I mean when you offer the panel up)... then just cut a slot/trim around where the rear grab handles sit:

http://i492.photobucket.com/albums/r...n/DSC01137.jpg

Have fun!

Jx

Chris1811 28-03-12 23:30

Quote:

Originally Posted by JMo (Post 170326)
Having seen Stoic at the weekend, I was just going to suggest the KTM one on his bike, but I see he already has!

As for the side panels - I think you mean the (Honda) XR400 ones, rather than a WR?

http://i492.photobucket.com/albums/r...t/DSC00696.jpg

http://i492.photobucket.com/albums/r...t/DSCF3334.jpg

They are very east to fit - the lower hole lines up with the upper pillion footrest bolt, and the upper hole you need to use a spring clip with a captive nut on the flat plate/brace on the subframe (you'll see where I mean when you offer the panel up)... then just cut a slot/trim around where the rear grab handles sit:

http://i492.photobucket.com/albums/r...n/DSC01137.jpg

Have fun!

Jx

Cheers JMO that clears a few bits up.!

Ill be ordering a few bits tomorrow as its pay day so watch this space lol.........

Chris1811 03-04-12 12:52

My new high front fender arrived on sat just before leaving to go to brighton for the wrekend.

There wws no way I was leaving home without fitting it. I had to drill 2 small holes as the 4 provided were not quite in the right place. Other than that it fits perfectly! Ive used the tow loop underneath the fender to give it a little more support.

Anyway here it is........
http://i733.photobucket.com/albums/w...s/IMAG0656.jpg

It comes very close to the radiator but passes without catching. I did 200 miles on the m1 and m25 with no over heating issues. Allthough I think I will use a dremmel to cut a few vents in the back as I may experience overheating when moving at slow speeds.

Ive also removed the peg rubbers ro see how the standard pegs are. And so far they have been ace! Not had any discomfort at all. But the lakes trip with lots of standing up may change my opinion!

maxwell123455 28-10-12 22:21

Chris

how's the high front mud guard going?

thinking of doing the mod myself but think there maybe loads of mud flinging up on the front of engine so might make a wee short mud guard like on the xtr to stop the mud flinging if its an issue

Pleiades 28-10-12 22:27

Quote:

Originally Posted by maxwell123455 (Post 180456)
thinking of doing the mod myself but think there maybe loads of mud flinging up on the front of engine so might make a wee short mud guard like on the xtr to stop the mud flinging if its an issue

Been thinking along the same lines too. A genuine OE Yamaha lower mudguard for the R is just �16.78 and I reckon without too much messing about will fit. I'm going to risk it and buy one at that price and see what needs altering (before I buy a high guard). I'll let you know how it goes.

maxwell123455 28-10-12 23:05

Quote:

Originally Posted by Pleiades (Post 180459)
Been thinking along the same lines too. A genuine OE Yamaha lower mudguard for the R is just �16.78 and I reckon without too much messing about will fit. I'm going to risk it and buy one at that price and see what needs altering (before I buy a high guard). I'll let you know how it goes.

good man.

I bought a high front guard but haven't had time to fit it n just been thinking of my off road bike after a wee run always has masses of mud on front and don't fancy that on the tenere.

Chris1811 29-10-12 17:48

The one I bought which Bernard has popped a link to somewhere above does come down in front of the radiator.

I don't get any rubbing or over heating. We got nice and muddy up the lakes and didn't really notice any undue/unexpected mud on the rad.

I suppose it's personal preference more than anything. Personally the only reason whybI changed mine was because I hated the look of the standard one and felt it ruined the look of the bike.

Have u got the fender on get?

phil ten 29-10-12 19:21

Ive got a high mud guard, and yes it allows the front of the bike to get plastered in mud!

the only reason i have one is (apart from it came with the bike) is that i dont want the sticky mud building up and braking the OEM (low) mud guard...or jammin the front.

Has this actually happpened to anyone though? is it an old wifes tale like swans can break your arm - how many people have you ever seen with a broken arm done by a swan! :)

maxwell123455 29-10-12 22:08

for me it's mainly a looks thing as I like the motorcross and Dakar bike. part from that I like being different from standard

Pleiades 03-11-12 09:25

Sorted the XTR mudguard mod - works a treat! :D

Rather than highjack Chris' thread I've started a new one here


All times are GMT +1. The time now is 09:08.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.